CLEAN & CLEAR PLUS FILTER REPLACEMENT PARTS
| Legend | Part # | Description |
|---|---|---|
| 1 | 190058 | Gauge, pressure, 1/4 in. |
| 2 | 98209800 | High Flow manual air relief valve, HFMARV |
| 4 | 178616 | Spring, compression 2 |
| 5 | 170026 | Manifold, top assembly, 240 sq. ft. 2 |
| 5 | 170027 | Manifold, top assembly, 320, 420 & 520 sq. ft. 2 |
| 6 | R173572 | Cartridge element, 240 sq. ft., 4 req. |
| 6 | R173573 | Cartridge element, 320 sq. ft., 4 req. |
| 6 | R173576 | Cartridge, 420 sq. ft., 4 req. 2 |
| 6 | R173578 | Cartridge, 520 sq. ft., 4 req. 2 |
| 7 | 170030 | Air bleed tube assembly, 240 sq. ft. |
| 7 | 55028500 | Air bleed tube assembly, 360, 420 sq. ft. 1 |
| 7 | 170029 | Air bleed tube assembly, 320 sq. ft. 2 |
| 7 | 170028 | Air bleed tube assembly, 420 sq. ft. 2 |
| 7 | 55028400 | Air bleed tube assembly, 500 sq. ft. 1 |
| 7 | 178583 | Air bleed tube assembly, 520 sq. ft. 2 |
| 8 | 170035 | Manifold, bottom/pipe assembly, outlet 3 |
| 8 | 170040 | Manifold, bottom 4 |
| 10 | 39010200 | O-ring, clamp |
| 11 | 190003 | Clamp kit, tension control |
| 12 | 53006300Z | Washer, .325 i.d. for filter clamp |
| 12 | 195610 | Washer, sm. i.d. |
| 13 | 53108900 | Spring/barrel nut assembly |
| 14 | 190039 | Baffle, bulkhead assembly 2 |
| 15 | 86006900 | O-ring, bulkhead, lower |
| 16 | 98960311 | Bulkhead union, set 1 |
| 16 | 271096 | Bulkhead adapter kit, 2 in. O.D. white |
| 16 | 270004 | Bulkhead adapter kit, 2 in. O.D. black |
| 16 | 270100 | Bulkhead union kit, 2 in. I.D. Black |
| 16 | 274426 | Bulkhead adapter kit, 2-1/2 in. x 2 in. I.D. White |
| 17 | 170035 | Pipe assembly, outlet/manifold, bottom (includes bulkhead 178575 and O-rings 86006900 & 3544571) 2 |
| 18 | 86300500 | Drain cap gasket 1 |
| 18 | 51005000 | O-ring for drain plug 2 |
| 18 | 191474 | O-ring for drain plug 8 |
| 19 | 51516200 | Drain cap 1 |
| 19 | 86202000 | Plug, 1-1/2 in. drain with O-ring 2 |
| 19 | 190030 | Cap plug 8 |
| 20 | 170023 | Tank, lid assembly, 240 sq. ft. |
| 20 | 170024 | Tank, lid assembly, 320 sq. ft. |
| 20 | 178581 | Tank, lid assembly, 420 sq. ft. 2 |
| 20 | 178550 | Tank, lid assembly, 500 sq. ft. 1 |
| 20 | 178582 | Tank, lid assembly, 520 sq. ft. 2 |
| 21 | 178578 | Tank, bottom assembly 2 |
| 22 | 192320 | O-ring, bulkhead, upper 2 |
| 22 | 86006900 | O-ring, bulkhead, upper & lower 1, 7 |
| 23 | 195339 | SS back-up ring 5 |
| 24 | 194801 | Bulkhead, 2-3/8, 8 buttress thread 2 |
| 25 | 190106Z | Air Screen |
| NOT SHOWN | ||
| 192019 | Drain plug wrench | |
| 178708 | Parts Bag - includes warranty card, instructions, and items 1, 2, and 16. |
Features
Clean & Clear Plus Cartridge Pool Filters have:
Corrosion-resistant,
Injection-molded,
Fiberglass-reinforced,
Polypropylene filter tank featuring superior strength and reliability.
The cartridge assembly uses four, nonwoven, polyester cartridges.
There is no need for backwashing. Simply remove the cartridges and rinse with a garden hose, reducing water consumption.
Large filter area for increased dirt capacity
100% drain clean-out port
Continuous High Flow™ Internal Air Relief*
Durable injection-molded tank
Balanced hydraulic flow
Corrosion-resistant,
Injection-molded,
Fiberglass-reinforced,
Polypropylene filter tank featuring superior strength and reliability.
The cartridge assembly uses four, nonwoven, polyester cartridges.
There is no need for backwashing. Simply remove the cartridges and rinse with a garden hose, reducing water consumption.
Large filter area for increased dirt capacity
100% drain clean-out port
Continuous High Flow™ Internal Air Relief*
Durable injection-molded tank
Balanced hydraulic flow
| Weight | 70.000000 | Height | 39.000000000 |
| Width | 22.000000000 | Filtration Area | 320 sq ft |
| Pooltype | In Ground | Supplier | PENTAIR WATER POOL AND SPA |
| Inventory | In Stock |
Write Your Own Review
